Mounting Holes, WF-X9-10, AndroidSBC, Manila

TL;DR: Mounting Holes

AndroidSBC field desk: signage rollout map updated across retail, transport, hospitality and public venues serving Manila, Philippines. The WF-X9-10 X9 Android motherboard spans the IoT gateway with serial and GPIO field wiring and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, headless or LVDS output at 720p, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Manila and Philippines importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.

About AndroidSBC and the X9 Android Motherboard Family

AndroidSBC builds display boards for the way signage networks actually buy: one pilot batch, then a frame agreement, then staggered releases against a call-off schedule. The X9 family supports that pattern because the bill of materials is frozen per lot and the Manila partner can re-order the same configuration eighteen months later and receive the same board. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Philippines, bundled with the lot so the importer clears customs without a second round of test reports.

WF-X9-10 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-10 (IoT gateway with serial and GPIO field wiring) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Philippines importers sourcing the X9 family, the WF-X9-10-A variant is the typical configuration for the IoT gateway deployment use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing X9 Android Motherboards for Philippines Buyers

The second problem is the touch layer. A board is useless to an interactive kiosk if the infrared frame needs a calibration pass nobody can run, or if the capacitive panel reports touches offset by a third of the screen.

On the touch side the HID configuration ships in the carton. Infrared, optical, capacitive and resistive panels enumerate as standard HID devices, so the Manila integrator plugs the frame in and the screen reports touches without a calibration pass, and the NTC / DTI-BPS documentation covers the radio modules too. AndroidSBC confirmed on September 24, 2026 that 151400 boards for Manila were on the water via Manila - Shanghai, with the panel and touch validation report from the Longgang bench included in the packing list.

Competitive Comparison: WF-X9-10 vs Competing Commercial Display Android Boards

The X9 family was specified against the failure modes Manila operators reported on previous rollouts, which is why the comparison reads the way it does.

• Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Manila integrators mount a locally sourced screen without a calibration pass.
• Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Manila usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Manila integrator to obtain.
• Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Manila.

Global Digital Signage and Commercial Display Market Trends

Video screens account for roughly 50.2 percent of the market by type and retail for about 50.1 percent by application. That matters to a Manila buyer because it means the board is the part being specified, while the enclosure, the panel and the mounting hardware are often reused.

• Entry playback tier: WF-X9-10 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
• Interactive mainstream tier: WF-X9-03 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
• Connected and unattended tier: WF-X9-04 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.

The Philippines demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the X9 price list, MOQ and lead time because a Manila partner is budgeting a multi-year refresh, not a single purchase order.

Partner Success Story: Nordweg Skjerm Systemer (transit and station screen integrator)

A recent Nordweg Skjerm Systemer deployment in the Nordic transport signage segment shows how the X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Manila integrators. Nordweg Skjerm Systemer deployed 151400 X9 boards across 140 station and transit screens.

• OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Skjerm Systemer branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
• Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus NTC / DTI-BPS conformity, all bundled into the Shenzhen source-factory shipment.

Nordweg Skjerm Systemer Technical Director for Nordic Transport Signage highlighted: Nordweg Skjerm Systemer picked the X9 board because the scheduled power cycle and the RTC hold through a Nordic winter timetable, and 151400 boards went into the Manila network without a panel change.

Field Report: IoT gateway deployment at an industrial park

PINGHU, September 24, 2026 - Jian Guo, AndroidSBC field desk. On the Philippines configuration the WF-X9-10 ran kiosk-mode lockdown with a single operator app, and the watchdog recovered the screen after each simulated mains dip. The WF-X9-10 X9 Android motherboard order for Manila, Philippines cleared the burn-in station on schedule and is en route via the Manila - Shanghai lane.

The WF-X9-10 IoT gateway with serial and GPIO field wiring production lot includes the WF-X9-10-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For Philippines integrators, the NTC type approval with BPS import commodity clearance paperwork is bundled.

Filed by Jian Guo, AndroidSBC field desk, PINGHU. Philippine mall operators ask for NTC type approval and prefer the touch panel calibrated for high-humidity environments.

WF-X9-10 Application Scenarios

The WF-X9-10 IoT gateway with serial and GPIO field wiring sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-10-A configuration is the typical build for the IoT gateway deployment use case, with panel driver, touch HID configuration and staged OTA management bundled.

• Advertising machine and digital signage: the WF-X9-10 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
• Interactive query and wayfinding: the WF-X9-05 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
• Smart retail terminal and vending: the WF-X9-06 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
• Parcel locker and fresh food cabinet: the WF-X9-07 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
• Face recognition access control: the WF-X9-08 takes the camera input and the door controller wiring on the same board.
• Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
• Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
• Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
• Retrofit programmes in Manila: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.

Partnership Models for Manila Buyers

For Manila and Philippines buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.

• Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.

All three tracks give Manila partners the same thing underneath: a factory-built board, a frozen bill of materials and a firmware window measured in years rather than months.

Frequently Asked Questions

Does the X9 Android motherboard family support an IoT gateway with serial and GPIO field wiring?

Answer: Supported. The IoT gateway with serial and GPIO field wiring is part of the standard X9 configuration set, and the board ships to Manila with the panel files and the firmware baseline already matched.

Which configurations are available in the X9 family for Philippines buyers?

Answer: The family covers entry playback, interactive touch, connected 4G and wide-temperature industrial configurations. The board in this specification is supported for seven years from release.

Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?

Answer: One board handles panel, touch and peripherals. The driver package ships in the carton covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC, RFID, ID card reader and fingerprint reader.

What is the minimum order quantity and the sample lead time for Philippines?

Answer: For Manila buyers the entry point is a single sample board on a 1-3 day lead. Volume follows a 15-30 day production slot, booked against an allocation rather than quoted spot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes - custom ROM, boot logo, boot animation, pre-installed applications and UI work are all available, and the customised image becomes the reference build for later lots.

How are firmware updates delivered to a Philippines screen estate after deployment?

Answer: Firmware is delivered over the network, by USB or by TF card, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the X9 family.

What shipping terms does AndroidSBC support for Philippines orders?

Answer: AndroidSBC quotes FOB Shenzhen, CIF and EXW, and handles export customs clearance and global shipping. The Manila partner books the lane that suits the import process.

What happens if a board fails in the field in Philippines?

Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Manila programme so the screen is not dark for a full lead time.

Contact AndroidSBC: Start Your WF-X9-10 Sourcing Conversation

For the X9 Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Manila integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Philippines buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the X9 family.