EDLA Commercial POS Certification, WF-P7602, AndroidSBC, Manila

TL;DR: EDLA Commercial POS Certification

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-P POS board family serving Manila, Philippines. The WF-P7602 POS Android motherboard spans the triple-screen POS terminal with independent content and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, HDMI plus LVDS plus eDP triple independent output, and Android 14 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Manila and Philippines importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

The twelve WF-P models share a single peripheral interface contract. A Philippines distributor who starts on the RK3568 dual-screen tier for a convenience chain can step up to the RK3576 AI tier for a face payment project without changing the printer connector, the touch controller or the OTA workflow. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Philippines, bundled with the lot so the importer clears customs without a second round of test reports.

WF-P7602 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7602 (triple-screen POS terminal with independent content) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Philippines importers sourcing the WF-P family, the WF-P7602-A variant is the typical configuration for the hypermarket checkout plus promotion wall use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Philippines Buyers

POS counters punish hardware in a way that office equipment never does. Grease, steam, spilled drink, a drawer slammed shut ten thousand times a month, and a mains supply that dips every afternoon - the Philippines rollout fails on those details long before it fails on CPU benchmarks.

For Manila integrators worried about the trading-company risk, AndroidSBC ships from the same building the boards are built in. The source factory address is on the packing list, the test record carries a serial number, and the NTC type approval with BPS import commodity clearance route used in Philippines is issued against that factory, not against a reseller. The 2nd release for Manila - 189500 units on September 23, 2026, Manila - Shanghai lane - was built against the same reference image the partner qualified, so the lanes went live without a re-test cycle.

Competitive Comparison: WF-P7602 vs Competing POS Android Boards

Competing boards reaching Manila usually win on unit price and lose on everything that happens after the first container. The four points below are where that shows up.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Two forces drive the Philippines POS hardware cycle. The first is the shift to contactless and wallet payments, which pushes the NFC reader and the payment kernel onto the board itself. The second is the regulatory floor - EMV, PCI DSS and national fiscal rules - which forces an upgrade on a timetable the merchant does not control.

• Entry counter tier: WF-P7602 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P3600 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P3601 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

For Manila buyers the reading is straightforward: the market is growing on replacement, not on first-time installation, so the board that wins is the one that fits the enclosure already on the counter.

Partner Success Story: Nordweg Kasse Systemer (convenience chain POS integrator)

The Nordweg Kasse Systemer rollout in the Nordic convenience retail segment shows how the WF-P family from AndroidSBC supports Manila integrators. Nordweg Kasse Systemer deployed 189500 WF-P boards across 140 convenience counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Kasse Systemer branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus NTC / DTI-BPS conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Nordweg Kasse Systemer Technical Director for Nordic Convenience Retail: Nordweg Kasse Systemer picked the WF-P board because the receipt printer and the cash drawer fired correctly on the sample unit, and 189500 boards went into the Manila estate without a driver change.

Field Report: triple-screen checkout and promotion wall at a hypermarket

YANTIAN, September 23, 2026 - Chu Lin, AndroidSBC field desk. The WF-P7602 held its dual-screen output through the full 72-hour soak, with the customer display running an independent promotion loop at its own resolution. The WF-P7602 POS Android motherboard order for Manila, Philippines cleared the burn-in station on schedule and is en route via the Manila - Shanghai lane.

The WF-P7602 triple-screen POS terminal with independent content production lot includes the WF-P7602-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Philippines integrators, the NTC type approval with BPS import commodity clearance paperwork is bundled.

Filed by Chu Lin, AndroidSBC field desk, YANTIAN. Philippine chains ask for NTC type approval and prefer the touch panel calibrated for high-humidity counter environments.

WF-P7602 Application Scenarios

The WF-P7602 triple-screen POS terminal with independent content sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7602-A configuration is the typical build for the hypermarket checkout plus promotion wall use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P7602 drives the cashier screen while the second lane carries the customer display or the promotion wall in Manila.
• Convenience and small format stores: the WF-P3602 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3566 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P3288 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P3399 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Manila: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Manila Buyers

AndroidSBC runs three commercial tracks on the WF-P family, and Manila partners usually start on one and move to another as volume builds.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

The Manila partner keeps the commercial relationship; AndroidSBC keeps the factory discipline. That division is what makes the tracks work at volume.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a triple-screen POS terminal with independent content?

Answer: Yes - triple-screen POS terminal with independent content is supported across the WF-P line, and the Manila configuration is locked as the reference for later lots so re-orders behave identically.

Which silicon tiers are available in the WF-P family for Philippines buyers?

Answer: Eight silicon tiers are offered, and the RK3576 platform sits in the middle of the range. Each tier carries the same peripheral interface contract, so a Manila partner can move between them without re-writing drivers.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: It can. The WF-P family is specified so one board carries the full counter harness: printer, scanner, drawer, customer display and payment reader, with no expansion card required.

What is the minimum order quantity and the sample lead time for Philippines?

Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. The engineering desk handles custom ROM, boot branding, pre-installed apps, BSP porting and SDK modules, and the Manila partner keeps the same image across re-orders.

How are firmware updates delivered to a Philippines estate after deployment?

Answer: The OTA channel is staged and reversible. A Manila chain pushes to a pilot group first, and if a printer or drawer regression appears the image rolls back to the previous build.

What shipping terms does AndroidSBC support for Philippines orders?

Answer: The export desk quotes FOB Shenzhen, CIF and EXW, handles customs clearance, and ships globally. The Manila partner picks the term and AndroidSBC books the lane.

What happens if a board fails in the field in Philippines?

Answer: Failures are handled against the serialised test record. AndroidSBC traces the unit to its lot, confirms the BOM, and ships a replacement from the Manila call-off stock or the next production slot.

Contact AndroidSBC: Start Your WF-P7602 Sourcing Conversation

Manila integrators can reach the AndroidSBC export desk for the WF-P POS board family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Philippines buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-P family.