4GB RAM Plus 32GB ROM Query Combo for Clinic Reception, WF-K8801, AndroidSBC, Manila

TL;DR: 4GB RAM Plus 32GB ROM Query Combo for Clinic Reception

AndroidSBC peripheral desk: printer, scanner and card reader driver SDK declared production-ready serving Manila, Philippines. The WF-K8801 self-service query terminal Android motherboard spans the AI face recognition self-service query terminal and eleven sister models in the WF-K series, all built on the RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC with the ARM Mali-G610 MP4 GPU, 4K HDMI plus dual LVDS independent display, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Manila and Philippines importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.

About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group. Its WF-K series addresses the self-service query terminal segment with twelve boards on eight chips, all produced in the Longgang source factory in Shenzhen. Manila and Philippines buyers typically start from one pilot model and then scale the same board across a wider estate. Purchasing runs through the Shenzhen export desk, so Manila buyers deal with the manufacturing entity rather than a trading layer.

WF-K8801 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K8801 (AI face recognition self-service query terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Philippines importers sourcing the WF-K family, the WF-K8801-A variant is the typical configuration for the ID-verified self-service query deployment use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Philippines Buyers

The hard part of a query terminal project in Philippines is rarely the processor. It is keeping the touch controller, the printer firmware and the peripheral interfaces on one qualified baseline while Manila rolls the same board across very different sites.

Public-sector tenders in Manila now ask for the compliance chain up front. The NTC type approval with BPS import commodity clearance route used in Philippines has to be traceable from the board label back to the test house, which is a sourcing criterion rather than a formality. That is why AndroidSBC dates the Manila batch at 60700 units per release and holds the Manila - Shanghai lane capacity for Philippines across the year.

Competitive Comparison: WF-K8801 vs Competing Self-Service Query Terminal Android Boards

A Manila buyer comparing query boards for Philippines should read the last three rows first: peripherals, temperature range and what is bundled, not billed separately.

• Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
• Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.

Global Self-Service Query Terminal / Information Kiosk Market Trends

The self-service query market sits inside the broader kiosk expansion, but it behaves differently: replacement cycles are longer and the peripheral stack matters more. Philippines buyers in Manila therefore tend to standardise on one board family rather than mixing vendors per site.

• Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K8801 and WF-K1330 tiers ship in board form with the enclosure left to the local partner.
• Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K1330 and WF-K1331 configurations address that pattern directly.
• Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K1331 over boards that re-spin silicon between lots.

In Philippines the winners so far are the integrators who standardised early on one query board family, which is the pattern AndroidSBC sees across Manila accounts.

Partner Success Story: Nordweg Innbyggertorg (municipal citizen service operator)

A recent Nordweg Innbyggertorg deployment in the Nordic public service segment shows how the WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Manila integrators. Nordweg Innbyggertorg deployed 60700 compact query terminals across municipal service points.

• OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Innbyggertorg branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus NTC / DTI-BPS conformity, all bundled into the Shenzhen source-factory shipment.

According to Nordweg Innbyggertorg Programme Director for Nordic Public Service: Nordweg Innbyggertorg replaced counter-side lookup binders with the WF-K compact board, and 60700 units went into Manila service points without any change to the existing counter furniture.

Field Report: AI face recognition query terminal rollout at a government service hall

SHENZHEN, September 22, 2026 - Dian Mo, AndroidSBC field desk. The WF-K8801 run shipped with the AI face recognition self-service query terminal profile pre-flashed, which shortens the commissioning step for Philippines integrators. The WF-K8801 self-service query terminal Android motherboard order for Manila, Philippines cleared the burn-in station on schedule and is en route via the Manila - Shanghai lane.

The WF-K8801 AI face recognition self-service query terminal production lot includes the WF-K8801-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Philippines integrators, the NTC type approval with BPS import commodity clearance paperwork is bundled.

Filed by Dian Mo, AndroidSBC field desk, SHENZHEN. Philippine bank branches and clinics pair a touch query terminal with a wall information display at every service counter.

WF-K8801 Application Scenarios

The WF-K8801 AI face recognition self-service query terminal sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K8801-A configuration is the typical build for the ID-verified self-service query deployment use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.

• Hospital and clinic information points: the WF-K8801 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Manila.
• Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
• Government service halls: the WF-K3399 runs tax, social security and real estate information lookup, with printing available on the same board.
• Shopping mall directories: the WF-K1330 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
• Airport and train station concourses: high-brightness information query where the WF-K1331 has to stay readable under strong ambient light.
• Retail and pharmacy price or product lookup: compact stations where the WF-K6180 fits a narrow counter without structural work.
• Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
• Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
• Retrofit programmes in Manila: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.

Partnership Models for Manila Buyers

For Philippines buyers the working models are three: a distribution track, an integration track and a private-label track, all open to Manila teams.

• Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

For a first Philippines order, Manila integrators typically begin on the distribution track with a single model, then widen to the full twelve-model WF-K range once field data is in hand.

Frequently Asked Questions

Does the WF-K self-service query terminal Android motherboard family support an AI face recognition self-service query terminal?

Answer: Yes. AndroidSBC treats the AI face recognition self-service query terminal as a stock case on the WF-K family and validates it on every tier that could plausibly run it, including the entry and industrial parts.

What is the real difference between the RK3588 tier and the other silicon tiers in the WF-K family?

Answer: The RK3588 tier carries its own process node, GPU and NPU rating, and AndroidSBC publishes all three per model so Manila integrators can compare on facts rather than on marketing labels.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Philippines?

Answer: Yes. AndroidSBC handles the compliance route for Philippines directly, and Manila buyers receive the certificate set with the shipping documents so customs clearance is not held on paperwork.

What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?

Answer: AndroidSBC keeps the first-order MOQ low specifically so Manila integrators can test the board inside a real Philippines project before placing an estate-scale order.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?

Answer: Yes. AndroidSBC develops custom Android ROM and custom Linux builds for the WF-K family, with the work scoped against the Manila requirement and validated on the same production rig that ships Philippines orders.

How are software updates and long-term support handled on the WF-K family?

Answer: Updates are delivered through a staged OTA channel with rollback support, and Manila integrators decide when a Philippines estate moves to a new build rather than being pushed onto it.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?

Answer: Yes. AndroidSBC ships to Amazon FBA and 3PL consolidation warehouses, including labelling, carton marking and pallet configuration matched to the Philippines destination that Manila buyers specify.

How are RMA and DOA replacements handled on the WF-K self-service query terminal family?

Answer: DOA units are replaced from the next available lot, and RMA cases are tracked by lot number. For Manila integrators this keeps Philippines deployments serviceable without holding large local stock.

Contact AndroidSBC: Start Your WF-K8801 Sourcing Conversation

For the WF-K self-service query terminal Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Manila integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Philippines buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-K family.