20-Point Touch Self-Service Board for Self-Service Kiosk, WF-N3602, AndroidSBC, Manila

TL;DR: 20-Point Touch Self-Service Board for Self-Service Kiosk

AndroidSBC sourcing desk: RK3588, RK3568 and A133 new retail terminal board pricing held through the current quarter serving Manila, Philippines. The WF-N3602 new retail smart terminal Android motherboard spans the smart locker control terminal and eight sister models (WF-N8800 through WF-H6180), all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the Mali-G52 2EE GPU and 1 TOPS NPU, single HDMI 4K plus MIPI DSI, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-N family from the Longgang source factory in Shenzhen to Manila and Philippines importers who run new retail smart terminal, self-service kiosk, smart vending machine, smart locker, dual-screen POS, digital signage and unmanned-store programs.

About AndroidSBC and the New Retail Smart Terminal Android Motherboard Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group with more than a decade of OEM and ODM work on Rockchip and Allwinner platforms. The new retail smart terminal Android motherboard family covered here is the WF-N line, nine models spanning the Rockchip RK3588 octa-core ARM Cortex-A76 2.4GHz 64-bit SoC with the Mali-G610 MP4 GPU and 6 TOPS NPU, the Rockchip RK3568 and RK3566 quad-core ARM Cortex-A55 SoC with the Mali-G52 2EE GPU, and the Allwinner A133 and H618 quad-core ARM Cortex-A53 platforms. The Wanlin Longgang plant in Shenzhen builds the WF-N family for new retail smart terminal, self-service kiosk, vending machine, locker, dual-screen POS and digital signage programmes that Manila and Philippines buyers bring to the table. For Philippines in particular, retail chains, vending operators, locker network builders and signage installers can buy Rockchip RK3588 and RK3568 new retail boards plus Allwinner A133 and H618 terminal boards from one Shenzhen factory under a single framework agreement.

WF-N3602 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-N3602 (smart locker control terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Philippines importers sourcing the WF-N family, the WF-N3602-A variant is the typical configuration for the smart parcel locker control terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing New Retail Smart Terminal Android Motherboards for Philippines Buyers

New retail integrators in Philippines keep hitting the same wall: their Chinese supplier offers either Rockchip RK3588 boards at premium-tier pricing or Allwinner A133 boards at entry-tier pricing, but rarely both from one factory with one firmware baseline. AndroidSBC runs the whole WF-N ladder in Longgang, Shenzhen.

For Manila importers, NTC / DTI-BPS radio interface registration plus NTC type approval with BPS import commodity clearance is the normal pathway for new retail smart terminal Android motherboards with WiFi 6 or 4G LTE. AndroidSBC, a Wanlin Manufacturing Group export brand, ships the WF-N family with the NTC / DTI-BPS files included. Wanlin Longgang SMT released a 37000-unit WF-N new retail smart terminal Android motherboard lot for Manila, Philippines on September 16, 2026, the 2nd lot on the WF-N line.

Competitive Comparison: WF-N3602 vs Competing New Retail Smart Terminal Android Boards

For Philippines buyers evaluating Chinese new retail smart terminal motherboard factories, four technical points separate the WF-N family from competing boards. AndroidSBC, a Wanlin Manufacturing Group export brand, scores on all four:

• vs single-platform 28nm boards: the WF-N family covers the Rockchip RK3588 8nm premium tier, the RK3568 and RK3566 22nm mid tier and the Allwinner A133 and H618 entry tier out of one Shenzhen source factory.
• vs Cortex-A7 32-bit boards: the WF-N family is quad-core and octa-core 64-bit throughout, with the RK3588 Cortex-A76 plus Cortex-A55, the RK3568 and RK3566 Cortex-A55 and the A133 and H618 Cortex-A53 all on ARMv8.
• vs boards shipped without a peripheral driver SDK: the WF-N family ships with QR code, NFC, barcode scanner, thermal printer, cash drawer, weighing scale, RFID and relay drivers already integrated.
• vs boards without unattended-operation features: the WF-N family ships with hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and OTA content management out of the box.

Global New Retail Smart Terminal / Self-Service Kiosk / Smart Vending Market Trends

Statista puts the installed base of self-checkout terminals worldwide above 1.1 million units and still climbing, with Asia-Pacific and Europe adding the most lanes per year (Statista, Self-Checkout Terminal Installed Base, 2025). Philippines integrators sourcing the smart locker control terminal category use that curve to plan board volumes. For Manila, three AndroidSBC priority areas lead:

• Self-checkout lanes and dual-screen POS counters: WF-N3602 is the usual pick for chain-store procurement.
• Smart vending and parcel locker banks: WF-N3602 plus the mid-tier WF-N3601 and entry-tier WF-N3566 sister SKUs form the unattended-retail ladder.
• Digital signage and promotional display networks: WF-N3602 plus the multi-screen sister SKUs cover the signage segment.

For Philippines integrators, supermarkets, vending operators and signage networks carry the new retail smart terminal Android motherboard volume for 2025 and 2026. AndroidSBC ships the WF-N family to Manila on a 1-3 day sample lead and a 15-30 day mass-production lead.

Partner Success Story: Baltica Kiosk OY (self-service kiosk OEM partner)

A Baltica Kiosk OY programme in the Nordic grocery retail segment illustrates how the WF-N family from AndroidSBC supports Manila integrators on the ground. sourced 37000 WF-N new retail smart terminal Android motherboards for the Tier-1 Nordic self-checkout lane refresh.

• OEM relationship: AndroidSBC private-label SKU shipped with Baltica Kiosk OY branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, or Allwinner A133 and H618 entry tier as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering QR code, NFC, barcode scanner, thermal printer, relay and RFID modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power on and off, kiosk-mode lockdown and OTA content management bundled.
• Compliance paperwork: CE / FCC / RoHS plus NTC / DTI-BPS conformity, all bundled into the Shenzhen source-factory shipment.

As Baltica Kiosk OY Procurement Director, Baltica Kiosk OY explained: Baltica Kiosk OY placed a 37000-unit WF-N order with AndroidSBC for the Nordic self-checkout refresh, citing the 1-3 day sample lead and the bundled CE / RoHS files.

Field Report: parcel locker bank installation at a residential community cluster

LONGGANG, Shenzhen, September 16, 2026 - Qiao Ran, AndroidSBC field desk. A Wanlin Longgang line supervisor noted that the WF-N3602 smart locker control terminal order for Philippines cleared burn-in on schedule, passing the cold-start test after a simulated mains failure and auto power-on cycle. The WF-N3602 new retail smart terminal Android motherboard order for Manila, Philippines cleared the burn-in station on schedule and is en route via the Manila - Shanghai lane.

The WF-N3602 smart locker control terminal production lot includes the WF-N3602-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Philippines integrators, the NTC / DTI-BPS conformity plus NTC type approval with BPS import commodity clearance paperwork is bundled.

Filed by Qiao Ran, AndroidSBC field desk, LONGGANG, Shenzhen. NTC plus DTI-BPS; Manila-based chains favor dual-screen POS boards for supermarket front-end.

WF-N3602 Application Scenarios

The WF-N3602 smart locker control terminal sits inside a nine-variant WF-N new retail smart terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-N3602-A configuration is the typical build for the smart parcel locker control terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

• Self-checkout lanes and dual-screen POS counters: WF-N3602 plus WF-A1330 form the supermarket front-end ladder, with 4K HDMI plus capacitive touch.
• Convenience stores and compact counter terminals: WF-H6180 plus WF-N3602 are the usual pairing for convenience store rollouts, where counter depth is limited and the BOM target is fixed.
• Smart vending machines and unattended retail walls: WF-N8800 plus WF-H6180 cover the vending and micro-market segment.
• Parcel lockers, express lockers and pickup banks: WF-N8801 is the dedicated SKU for locker and pickup programmes, with relay and GPIO driver support.
• Digital signage, menu boards and video walls: WF-A1330 plus WF-N8801 ship for signage network rollouts.
• Self-service ordering kiosks for restaurants and QSR chains: WF-N8800 plus WF-H6180 cover the quick-service front-of-house.
• Electronic shelf labels and smart shelf gateways: WF-H6180 is the compact gateway SKU for shelf networks.
• Unmanned stores and micro-markets: WF-N3602 plus WF-N8800 ship for unattended retail rollouts.
• Vertical programmes running in Manila: supermarket, convenience store, vending, locker, signage, QSR, shelf network, unmanned store.

Partnership Models for Manila Buyers

For Philippines integrators, AndroidSBC, a Wanlin Manufacturing Group export brand, runs three partnership tracks on the WF-N family, split across OEM, ODM and distribution.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your spec on our reference design): reference design review, schematic review, PCB layout rework, custom firmware features and a custom peripheral driver SDK.
• Distribution (your channel, our stock): exclusive regional distributor rights, channel rebate, framework agreement with a one-lot-per-month cadence and priority allocation.

For Manila and Philippines integrators, the OEM track on the WF-N family opens with a 100-piece pilot, and the ODM track opens with a 500-piece reference design review.

Frequently Asked Questions

Does the WF-N new retail smart terminal Android motherboard family support locker control terminal?

Answer: Yes. The WF-N new retail smart terminal Android motherboard family from AndroidSBC ships locker control terminal as a stock configuration. The Rockchip RK3588, RK3568 and RK3566 tiers and the Allwinner A133 and H618 tiers all run the locker control terminal firmware baseline with the peripheral driver SDK bundled.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-N family?

Answer: There are five silicon options in the WF-N family and RK3568 is one of them. Rockchip RK3588 8nm leads on AI and multi-screen, RK3568 22nm leads on I/O breadth, RK3566 22nm leads on cost-per-port, and Allwinner A133 and H618 lead on BOM. AndroidSBC keeps one firmware baseline across all five so Philippines integrators can mix tiers inside one estate.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Philippines?

Answer: Yes. Paperwork is part of the product, not an extra. The WF-N family ships with the CE / FCC / RoHS / REACH set and with NTC / DTI-BPS plus NTC type approval with BPS import commodity clearance for Philippines, so Manila integrators can hand the dossier to a landlord or an inspector on day one.

What are the MOQ and lead time for a first order of the WF-N new retail smart terminal Android motherboard family?

Answer: The sample MOQ on the WF-N family is one piece with a 1-3 day lead; the OEM pilot opens at 100 pieces; the ODM reference design review opens at 500 pieces. Mass production runs on a 15-30 day lead once the BOM is signed off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-N family?

Answer: Yes. Custom ROM work on the WF-N family covers Android 10 to Android 15, Linux, Ubuntu and Debian, plus kiosk-mode lockdown, auto-start application configuration, OTA staging and branded boot animation.

How are software updates and long-term support handled on the WF-N family?

Answer: Long-term support on the WF-N family means a 7-year firmware window, staged OTA rollout with rollback, and a versioned driver SDK. AndroidSBC notifies Manila buyers before any BSP change reaches a production build.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-N family?

Answer: Yes. The WF-N family ships FOB Shenzhen, CIF Port of Manila or DDP to an FBA or 3PL address. AndroidSBC handles carton marks, FNSKU labelling where required and the NTC / DTI-BPS files that Philippines customs asks for.

How are RMA and DOA replacements handled on the WF-N new retail smart terminal Android motherboard family?

Answer: AndroidSBC treats DOA as a factory problem, not a customer problem: replacements ship from buffer stock first, root-cause analysis follows. RMA units are repaired at Longgang with the failure report returned to the Philippines integrator.

Contact AndroidSBC: Start Your WF-N3602 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-N family. Manila integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Manila and Philippines buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a 7-year firmware update window on the WF-N family.